Log In
New User? Sign Up.  
  AUDIO
  CASE
  CPUS
  RAM
  UPS
 
Zalman ZM-MFC2 Fan Controller, 1 x 4-pin (supports PWM fans), 3 x 3-pin (supports RPM output function), Power and temperature display
 
Print This Page
Availability: Out Of Stock
Send inquiry
| More
Bookmark and Share
Online Price $86.24
Store Price $89.32
Perth Metro Delivery $0.50
Non-Metro Delivery $1.00
W.A. Country Delivery $1.50
Interstate Delivery $1.80
Minimum delivery charge refer to the total delivery for each item in your online order. Therefore, you can save money by order additional item(s) for your order.
In stock: This item usually ships in 1-2 business days
                                  
 
 
 
 
 
 
 
 
 
 
 
 
 
ZM-MFC2  
 
Controller for providing real-time power consumption and other various control displays.
 
 
 
 
 
 
 
 
 
 
Real time display of power consumption.
 
Four sensors for temperature monitoring and display.
 
Monitoring and control of one PWM fan and three standard fans.
 
Alarm system to notify non-operation of any of the fans.
 
Fan’s operation status indicated with animated propeller images.
 
 
Dimensions 147(L) x 87(W) x 42(H) mm
Power & Temperature Display 30~800W/ -9 °C~+99 °C
Fan Compatibility 1 x 4-Pin (Supports fans with PWM function)
3 x 3-Pin (Supports fans with RPM output function)
Fan RPM Control 60~5,940rpm PWM Regulation Method (Fan No.4)
Voltage Control Method (Fan No.1~3)
Output Current 0.7A
Output Voltage +4~11VDC
Input Voltage +12VDC/+5VDC
 
 
Graphic Power Load Meter: Displays power between 30 to 800W in 4 stages.
 
Numeric Power Load Display: Numerically displays power between 30 and 800W.
(The Numeric Power Load Display will read “LLL”when an overflow occurs. “LLL”indicates power loads beyond the unit’s measurable range.)
 
Fan Status Display: The Fan’s operation status is indicated with animated propeller images.
 
Fan Channels
 
RPM Display: During RPM Setting, RPM is displayed in units of 60RPM, and actual operational RPM is displayed in units of 10RPM.
 
Temperature Display: Displays temperature readings between -9 °C and +99 °C
 
Jog Wheel: Used for adjusting Fan RPM. RPM can be set from 1000 to 5940RPM in units of 60RPM.
 
Mode Button: Used for selecting a Fan Channel and saving the Fan RPM setting.
 
 
Standard Fans (Fan 1~3): 3-Pin fans that include the RPM output function can be connected for use.
PWM Fan (Fan 4): 4-Pin fan that includes the PWM function can be connected for use.
 
Temperature Sensing: Four temperature sensors can be connected.
 
CVS Terminal: Receives the measured values of the CVS.
 
Power Connector: Connects with the PSU’s 4-Pin connector.
 
- Four channels of ZM-MFC2 detect fan RPM signals.
- The Alarm will activate if a fan is not connected or if there is no RPM input signal for any of the channels.
- To deactivate the Alarm, the Stand-By Mode (default setting: ON) of each unused channel must be deactivated.
 
Selecting a Channel/Deactivating Stand-By Mode
(1) Select a channel with the Mode Button (The selected channel will begin to flicker).
(2) Press the Jog Wheel to deactivate the selected channel’s Stand-By Mode. The fan image will turn off.
(3) Deactivate the Stand-By Mode of all unused channels as mentioned above.

Note: Deactivating the Stand-By Mode of all the channels will not deactivate other functions (Channel Output, RPM Display, RPM Setting & Saving etc.)
 
RPM Setting and Saving
(1) Select a channel with the Mode Button.
(2) Set the RPM with the Jog Wheel. (Turning the Jog Wheel in clockwise motion will increase the RPM, and turning it counter-clockwise will decrease the RPM)
(3) Press the Mode Button again to save the set value and to select the next channel.
(If nothing is input for 5 seconds, the ZM-MFC2 will automatically save the latest setting and leave the Setting Mode).
 
Initializing to Default Settings
Press the Mode Button for 3 seconds. (The entire display will be on for 1 second and all fans will be set to 1500 RPM)
 
- One ZM-MFC2
- One CVS (Current/Voltage Sensor)
- One Bracket/CVS Extension Cable
- Four Temperature Sensors
- Fan Cables : 3-Pin 1EA, 4-Pin 1EA, Y-Cable 1EA,
   C3 Cable 1EA
- Four ZM-MFC2 Installation Bolts
- One Bracket Installation Bolts
- One User’s Manual
 
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
 
Plugging in the CVS Cable of the CVS into the motherboard’s USB port may damage the motherboard and CVS.
 
If the current to be measured exceeds 10A (RMS), use a cable or conductor that allows current greater than the current to be measured to flow through it, and always connect protective grounding prior to use of this instrument.
   

Wheres My Stuff?
Track your orders
View your invoice or orders

Shipping & Returns
Shipping and Insurance Policy
You can return an item, please read return policies

Keep a Relationship
Sign up to our Weekly Deals

 
Home | About Us | Privacy | Disclaimer | Terms and Conditions | Warranty | Payment Options | Career | Contact Us
Corporate Sales | Educational Sales
Promotions
 

Copyright © 1996-2010, Austin Computers Pty Ltd. All Rights Reserved.
Please ensure you have read and understood our Terms & Conditions and Disclaimer Policy before purchasing.
Austin Computers is not responsible for typographical or photographical errors.
Prices and specifications subject to change without notice.
Celeron, Celeron Inside, Centrino, Centrino Inside, Core Inside, Intel, Intel Logo, Intel Atom, Intel Atom Inside, Intel Core, Intel Inside, Intel Inside Logo, Intel Viiv, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, Viiv Inside, vPro Inside, Xeon, and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.